20 Channel MP3 Sound Board with 2x15W Amplifier
Buy 10, Get 5% Off!
Buy 100, Get 10% Off!
30-day money-back guarantee
Free Shipping in the U.S. on Orders over $50
Buy now and choose from several shipping methods.
FN- BC20 is a high quality MP3 sound board, equipped with an on-board 2x 15 W class D amplifier, the sound board can be controlled by 20 separate buttons hooked up to the ‘one-on-one’ inputs terminals, R232 serial port and RS485 serial port. Great audio output, industry-grade design and strong anti-jamming capability make it possible to be used for many different applications.
- Built-in a high quality 24bit of audio decoder with stereo audio output.
- Supports to play audio files of MP3 and WAV formats.
- On-board a high quality 2x15 Watt class D amplifier to directly connect with two 8 ohm speakers of 15Watts or more, for left channel and right channel.
- Uses SD card or USB flash drive for sound file storage devices.
- Supports maximum 32GB SD card or 32GB USB flash drive. (1GB SD Card included)
- Supports button control mode, RS232 and RS485 serial control mode.
- In button control mode, playback of the ‘one-on-one' associated audio files are triggered by negative pulse to any of the 20 input terminals.
- In button control mode, possible playback of 255 MP3/WAV audio files per 20 ‘one-on-one’ associated folders through negative trigger.
- In button control mode, Four Selectable triggering modes are provided.
- Supports audio output to an external amplifier through the RCA audio jacks.
- Separate volume control for each sound channel (only for on-board amplifier).
- On-board relay used to control on/off to external equipment during playback.
- Wide range for power input DC (12V - 24V).
- Industry-grade design and strong anti-jamming capability.
- PCB size: 135mm x 75 mm (5.315 Inches x 2.953 inches).
- Power input: DC12-24V
- Rated output: 15W×2 (RL= 8Ω d=1%)
- Noise Voltage: ≤50mV
- Frequency response: 20-20KHz
- SNR:≥ 90dB
K1 through K20 are representing Normally Open (N.O.) manual buttons. Please refer to the connection example below.
Ronnie on 11/08/2016 00:55:31
Can you use a light sensor to turn this on and have it control lights ?