These Modules can be programmed with any version of Windows (including Windows 10) or Apple Mac Computers
This kit includes
- The MP3 player board with build in 3 Watt amplifier
- 4 push buttons with 12" leads
- a 3-watt speaker with 6 inches of wire connected.
- 3 x AA battery holder with 5.9" leads
All that is needed is a small screwdriver to attach the wires to the MP3 board. Add 8 x AA batteries and you are good to go!
This module plugs directly into the USB port of your PC. Flash sound module with 4 button trigger with multiple sound files per button. Built-in an 8MB flash memory, which is able to store a total of about 8 minutes of MP3 files of Supports Windows 10 or earlier, and Mac operating systems. Support audio format MP3 and WAV
Has a 10 watt built in amplifier. Terminal blocks eleimnates need to solder to connect speaker, buttons and power supply .
10w built in amplifier that is great for everyone. Solder pads used to connect to a speaker, buttons and power supply
Equipped with an on-board 2x 15 W class D amplifier, the sound board can be controlled by 20 separate buttons hooked up to the ‘one-on-one’ inputs terminals, R232 serial port and RS485 serial port. Great audio output
Board has 18 external trigger pins that will directly trigger pre-selected MP3 tracks, and a full-duplex serial control port that provides full transport control, remote triggering for up to 256 tracks, and fast real-time volume control. MP3s are stored on FAT16 formatted SDSC or FAT32 formatted SDHC micro-SD flash memory cards.
Integrates MP3 and WAV decoder together perfectly, and supports parallel port control mode, UART serial port control and key control mode. It takes a SD card or USB flash stick as the storage device. Supports 3,000 audio files under root directory. Supports up to 99 folders and each folder can store up to 255 audio files
Support USB disk and microSD card. No soldering with speaker terminals for easy wiring. can be powered through the micro USB port. On-board 2W mono amplifier
Small with high quality MP3 audio output. Detection range up to 4 meters. built in 2MB flash storage or can use a micro SD card. two level sound adjustment
Adjustable volume. Module that has a micro SD card slot. Build in 2 Watt amplifier or can connect via 3.5mm audio plug to external amplifier. Built-in rechargeble Lithuim battery
Build in loud 20W speaker. Volume adjustement. Built in 4MB flash storage. Supports micro SD card. Detection range up to 5M.
Small and low price MP3 module with an simplified output directly to the speaker. Can be used as audio advertising player for supermarkets or shops, talking sign for POP displays and point of sales, smart doorbell, door greeter, automatic explanation machine, audio memo reminder, security alarm and so on.
Built-in a high quality MP3 player with great sound quality. Upload MP3 files to the flash memory easily through the mini USB port. Supports a micro SD card (not included) as well. Equipped with a 10 watts amplifier for a loud sound output.
Built in a 3 watt amplifier on board that is able direct drive a 3W/8ohm speaker. MP3 audio format. 16 levels adjustable sound volume. Supports storage of max. 3584 MP3 sound files.
a simplified serial MP3 module with a perfect integrated MP3 and WMV decoder chip. It provides a micro SD card driver, and supports FAT16 and FAT32 file systems. It is able to play back specified sound files and realize other functions through simple serial commands
This is a small greeting card sound module activated by light sensor. This is great for those who want to add an extra feature on greeting cards to make them more special and unique
This is a small greeting card sound module activated by a button. This is great for those who want to add an extra feature on greeting cards to make them more special and unique
Small and low price MP3 module with an simplified output directly to the speaker. The module can be used as a stand alone module with attached battery, speaker and push buttons or used in combination with an Arduino UNO or any other with RX/TX capabilities.
This is a high quality MP3 audio recorder and player module. This module uses a micro SD card to store the sound files. Built in 1W amplifier
Turn any Arduino into a fully functional stand-alone MP3 player! With this board you can pull MP3 files from an microSD card and play them using only one shield.
The breakout board includes a battery connector and a micro-SD card slot. Simply load your audio files onto a micro-SD card and plug it in, power up the module and trigger the playback. Playback can be triggered in either key or serial mode:
Adopts passive infrared detection technology.
Detection distance of the PIR motion sensor is up to 5 meters.
Detection angle of the PIR motion sensor is 120 degrees fan-wise.
Built-in a high-quality MP3 player with an onboard 4Mbytes flash memory.
- 6 trigger inputs available and triggered by negative pulse or GND.
- The function/trigger mode of each input can be set individually through a configuration file.
- Each input can store more than 1 sound file
- Equipped with a high-quality audio decoder that is able to decode MP3 and WAV audio formats.
- Built-in a 4MB flash memory by default, and supports max. 32GB micro SD card.